24
Adding and Removing Color Modes
RUBY 7
HD
has five default color modes. You can also activate and choose from a variety of 15
other color modes. Once a color mode is available, you can easily switch to it using the blue
arrow buttons ( or ).
To add or remove other color modes, do the following:
1. Press and HOLD the green/yellow
Power
button
and then press the blue
Up
arrow
button to enter Color Selection mode.
The Enable check box
displays indicating that the current color mode is active.
2. To disable the current color mode, press the blue
Down
arrow while STILL holding the
green/yellow
Power
button
. This button sequence clears the check box.
Note:
By disabling a color mode, it is no longer available as you cycle through the color
modes using the blue
Up
or
Down
buttons during normal operation.
