116
show
end
The configarea command has 3 subcommands.
config filter-list
config range
config virtual-link
Note:
All area keywords are optional.
area command keywords and variables
Keywords & Variables Description
Default
authentication {md5 |
none | text}
Set the authentication type. Use the authentication keyword
to define the authentication used for OSPF packets sent
and received in this area. If you select none, no
authentication is used. If you select text, the authentication
key is sent as plain text. If youselect md5, an authentication
key is used to generate an MD5 hash. Both text mode and
MD5 mode only guarantee the authenticity of the OSPF
packet, not the confidentiality of the information in the
packet. In text mode the key is sent in clear text over the
network. Text mode is usually used only to prevent network
problems that can occur if anunwanted or misconfigured
router is mistakenly added to the area. If you configure
authentication for interfaces, the authentication configured
for the area is not used. Authentication passwords or keys
are defined per interface. See “config ospf-interface” .
none
default-cost
<cost_integer>
Enter the metric to use for the summary default route in a
stub area or not so stubby area(NSSA). A lower default
cost indicates a morepreferred route. The valid range for
cost_integer is 1 to 16777214.
10
nssa-default-
informationoriginate
{disable | enable}
Enter enable to advertise a default route in a not so stubby
area. Affects NSSA ABRs or NSSAAutonomous System
Boundary Routers only.
disable
nssa-default-
informationoriginate-
metric <metric_integer>
Specify the metric for the default route set by the nssa-
default-information-originatekeyword.
10
nssa-default-
informationoriginate-
metric-type {1 | 2}
Specify the OSPF external metric type for the default route
set by the nssa-defaultinformation-originate keyword.
2
nssa-redistribution
{disable | enable}
Enable or disable redistributing routes into a NSSA area.
enable
nssa-translator-role
{always | candidate |
A NSSA border router can translate the Type 7 LSAs used
for external route information within the NSSA to Type 5
candidate
Summary of Contents for freeGuard 100
