138
•
Enter the following command to route traffic from the 192.168.20.0 subnet to the 200.200.200.0
subnet. Force the packets to the next hop gateway at IP address 2.2.2.1 through the interface named
external.
config router policy
edit 2
set input_device internal
set src 192.168.20.0 255.255.255.0
set dst 200.200.200.0 255.255.255.0
set output_device external
set gateway 2.2.2.1
end
•
Enter the following command to direct all HTTP traffic using port 80 to the next hop gateway at IP
address 1.1.1.1.
config router policy
edit 1
set input_device internal
set src 0.0.0.0 0.0.0.0
set dst 0.0.0.0 0.0.0.0
set output_device external
set gateway 1.1.1.1
set protocol 6
set start_port 80
set end_port 80
end
•
Enter the following command to direct all other traffic to the next hop gateway at IP address
2.2.2.1.
config router policy
edit 2
set input_device internal
set src 0.0.0.0 0.0.0.0
set dst 0.0.0.0 0.0.0.0
set output_device external
set gateway 2.2.2.1
end
Summary of Contents for freeGuard 100
