freeGuard 100 CLI User Manual
187
weekly • Check for updates once a week. Set day to the day of
the week to check for updates. Set timeto the time of day to
check for updates.
status {disable |
enable}
Enable or disable scheduled updates.
disable
time <hh:mm>
Enter the time at which to check for updates.
• hh can be 00 to 23
• mm can be 00-59, or 60 for random minute
01:60
Example
This example shows how to configure the freeGuard 100 to check the FDN for updates once a day at
3:00 in the morning.
config system autoupdate schedule
set frequency daily
set time 03:00
set status enable
end
This example shows how to display the settings for the system autoupdate schedule command.
get system autoupdate schedule
This example shows how to display the configuration for the system autoupdate schedule command.
show system autoupdate schedule
Command History
Related Commands
•
autoupdate
override
•
autoupdate
push-update
•
autoupdate tunneling
•
global
10.7 autoupdate tunneling
Use this command to configure the freeGuard 100 to use a proxy server to connect to the FDN. To use
the proxy server you must enable tunneling and add the IP address and port required to connect to the
proxy server. If the proxy server requires authentication, add the user name and password required to
connect to the proxy server.
Summary of Contents for freeGuard 100
