freeGuard 100 CLI User Manual
193
Command History
Related Commands
•
dhcp ipmacbinding
•
dhcp server
•
interface
10.11 dhcp ipmacbinding
Use this command to reserve an IP address for a particular device on the network according to the
MAC address of the device. When you add the MAC address and an IP address to the IP/MAC
binding list, the DHCP server always assigns this IP address to the MAC address. You can create up
to 50 IP/MAC binding pairs.
Note:
For this configuration to take effect you must set the interface to DHCP server mode using the
dhcpserver-mode keyword in the config system interface command.
Command syntax pattern
config system dhcp ipmacbinding
edit <name_str>
set <keyword> <variable>
end
config system dhcp ipmacbinding
delete <name_str>
end
get system dhcp ipmacbinding [<name_str>]
show system dhcp ipmacbinding [<name_str>]
dhcp ipmacbinding command keywords and variables
Keywords & Variables Description
Default
ip <address_ipv4>
Enter the IP address.
0.0.0.0
mac <address_hex>
Enter the MAC address.
00:00:00:00:00:00
Example
Use the following command to add an IP/MAC binding pair named ipmac_pair consisting of IP address
192.168.110.3 and MAC address 00:09:0F:0A:01:BC.
config system dhcp ipmacbinding
edit ipmac_pair
set ip 192.168.110.3
Summary of Contents for freeGuard 100
