freeGuard 100 CLI User Manual
195
set <keyword> <variable>
end
config system dhcp server
edit <name_str>
unset <keyword>
end
config system dhcp server
delete <name_str>
end
get system dhcp server [<name_str>]
show system dhcp server [<name_str>]
dhcp server command keywords and variables
Keywords & Variables Description
Default
default-router
<address_ipv4>
The IP address of the default gateway that the DHCP server
assigns to DHCP clients.
0.0.0.0
dns-server1
<address_ipv4>
The IP address of the first DNS server that the DHCP server
assigns to DHCP clients.
0.0.0.0
dns-server2
<address_ipv4>
The IP address of the second DNS server that the DHCP
server assigns to DHCP clients.
0.0.0.0
dns-server3
<address_ipv4>
The IP address of the third DNS server that the DHCP server
assigns to DHCP clients.
0.0.0.0
domain
<domainname_str>
Domain name suffix for the IP addresses that the DHCP
server assigns to DHCP clients.
No default.
end-ip <address_ipv4>
The ending IP for the range of IP addresses that this DHCP
server assigns to DHCP clients. The IP range is defined by
the start-ip and the end-ip.
0.0.0.0
interface <interface-
name_str>
The interface for which to configure the DHCP server.
internal
lease-time
<seconds_integer>
The interval in seconds after which a DHCP client must ask
the DHCP server for new settings. The lease duration must
be between 5 and 144,000 seconds. Set lease-time to 0 for
an unlimited lease time.
604800
netmask
<address_ipv4mask>
The netmask that the DHCP server assigns to DHCP clients. 0.0.0.0
option1 <option_code>
[<option_hex>]
The first custom DHCP option that can be sent by the DHCP
server. option_code is the DHCP option code in the range 1
to 255. option_hex is an even number of hexadecimal
characters. For detailed information about DHCP options,
see RFC 2132, DHCP Options and BOOTP Vendor
Extensions.
No default.
Summary of Contents for freeGuard 100
