198
autosvr {enable |
disable}
Enable or disable DNS forwarding.
disable
cache-notfound-
responses {enable
| disable}
Enable to cache NOTFOUND responses from the DNS
server.
disable
dns-cache-limit
<integer>
Set maximum number of entries in the DNS cache.
5000
fwdintf {internal |
dmz}
Enable DNS forwarding for either internal or DMZ interface.
No default.
primary
<address_ipv4>
Enter the primary DNS server IP address.
207.194.200.1
secondary
<address_ipv4>
Enter the secondary DNS IP serveraddress.
207.194.200.129
Example
This example shows how to set the primary FreeGuard 100 DNS server IP address to 45.37.121.76
and the secondary freeGuard 100 DNS server IP address to 45.37.121.77.
config system dns
set primary 45.37.121.76
set secondary 45.37.121.77
end
This example shows how to display the settings for the system dns command.
get system dns
This example shows how to display the configuration for the system dns command.
show system dns
10.14 fm
Use this command to configure the freeGuard 100 for remote administration from a Manager server.
Use the config vpn ipsec commands to set up the IPSec VPN tunnel.
Command syntax pattern
config system fm
set id <name_str>
set ip <addr_ipv4>
end
get system fm
Summary of Contents for freeGuard 100
