16
The following options are displayed.
allowaccess
detectserver
gwdetect
ip
•
To set the secondary IP address with the ID number 0 to 192.168.100.100 and the netmask to
255.255.255.0, type:
set ip 192.168.100.100 255.255.255.0
and press Enter.
•
To add another secondary IP address to the internal interface, type
next
and press Enter. The
prompt changes to
(secondaryip)#
.
•
To add a secondary IP address with the ID number 1, type:
edit 1
and press Enter. The prompt changes to
(1)#.
•
To set the secondary IP address with the ID number 1 to 192.168.100.90 and the netmask to
255.255.255.0, type:
set ip 192.168.100.90 255.255.255.0
and press Enter.
•
To restore the secondary IP address with the ID number 1 to the default, type
unset ip
and press
Enter.
•
If you want to leave the secondary IP address 1 shell without saving your changes, type
abort
and
press Enter.
•
To save your changes and exit the secondary IP address 1 shell, type
end
and press Enter. The
prompt changes to (internal)#.
•
To delete the secondary IP address with the ID number 1, type
delete 1
and press Enter.
•
To save your changes and exit the
internal
interface shell, type
end
and press Enter.
•
To confirm your changes have taken effect after using the end command, type
get system
interface internal
and press Enter.
2.4
CLI basics
This section includes:
•
Command help
•
Command completion
•
Recalling commands
•
Editing commands
Summary of Contents for freeGuard 100
