3
PART I - Hardware Installation
1.
Remove the freeStor Mini 210 hard drive enclosure from the
package.
2.
Unscrew the two screws on the connector end of the
enclosure (Figure 1).
3.
Pull out the connector end of the enclosure (Figure 2).
4.
Connect the hard drive to the connector pins. Check that the
pins are lined up with the connector, and the top of the hard
drive and the one-touch backup button are both facing up
(Figure 3).
Note:
Some hard drives may be difficult to plug the hard drive
into the connector. In these cases, insert the pins into the
connector using firm and even pressure.
Figure 1:
Unscrew these
2 screws
Figure 2:
Pull out the
connector
Figure 3:
Connect the hard drive
to the connector pins
14
Technical Specifications
Technical Specifications for the freeStor Mini 210:
Interface:
USB 2.0
Transfer rate (Maximum):
480Mbps
Operating temperature:
32°F - 104°F (0°C - 40°C)
Storage temperature:
-4°F - 149°F (-20°C - 65°C)
Operating humidity:
20 - 85% RH
Storage humidity:
20 - 85% RH
Dimensions (L x W x H):
5.4” x 3.1” x 0.6” (136 x 80 x 16 mm)
Weight:
3.5 oz (100 g)