18
•
To get out of Auto Scan Mode, press the Space Bar.
•
Bank number and Port number selections must be made using the numeric keys on the
keyboard. Numeric keys on the numeric keypad are not available for hot key commands.
•
To restore the unit to factory default settings, press “Scroll Lock + Scroll Lock + R”. The
Display LEDs on the front panel will flashed during the refresh process. Once the unit has
been reset, the LEDs will stop flashing.
4.3 OSD
Operation
You can access the On-Screen Display (OSD) menu by using the hot keys (Scroll Lock + Scroll
Lock + Space Bar). The following window will be displayed on the monitor:
Figure 4-2: OSD Screen – Bank Number and Active Computer
Usage:
•
The first line shows the Bank Number (the default is 1).
•
The next section shows the systems connected to the KVM along with the computer
names. The computer names can be edited by highlighting it and pressing the “Insert” key.
Any port with an active system connected to it will have a sun symbol
beside it.
•
Use the arrow keys to select a computer and press “Enter” to activate it.
•
Use the “PgUp” or “PgDn” keys to select the previous or next Bank Number.
•
Press “Tab” key to toggle through the different sections of the menu.
Figure 4-3: OSD Screen – Settings and Commands
