BUTTON FUNCTION:
1
、
“SELECT” Button
：
Press this button to choose modes circularly “0
：
00” “15
：
00”
、
“1.0”
、
“50” “ P1-
P15…U01-U02-U03 -FAT”(“0
：
00” is manual model, “15
：
00” is the time count down, “1.0” is distance
count down and “50” calorie count down); when you choose each mode, you can press the speed
button and incline button to set value, after that ,press the START button to start this treadmill.
2
、
“START” button
：
when start the power and attach the magnet end of the safety pulling rope to the
computer, press this button and the machine will start work.
3
、
“STOP” button: Press this button to stop the machine;
4
、
“SPEED+”
、
“SPEED-” Button
：
Press this button to set the value under setting mode. Press this
button to adjust the speed when the machine is working.
5
、
“” , “ INCLINE-” button: Press this button to set the value under setting mode. Press this
button to adjust the incline when the machine is working.
6
、
”INCLINE: 5
、
8
、
12
、
15” incline shortcut button: set incline quickly
7
、
“SPEED
：
5
、
8
、
12
、
15” speed shortcut button
：
set speed quickly
START-UP QUICKLY (MANUAL)
1
、
Open the power switch, attach the magnet end of the safety pulling rope to the computer.
2
、
Press STATR button
，
the system will enter into 3 seconds count down, the buzzer will make sound
and the speed window display count down, the speed will run with speed of 1.0km/hour after 3
seconds.
3
、
After start-up, you can use speed up or down to adjust the speed up or down, and use incline up or
down to adjust the incline up or down.
THE OPERATION OF EXERCISE PROCESS:
1. Press speed-down will reduce the running speed.
2. Press speed-up will increase the running speed.
3. Press incline down will reduce the incline section.
4. Press incline up will increase the incline section.
5. Press the speed shortcut button will adjust the running speed.
6. Press incline shortcut button will adjust the incline section.
7. Press the stop button will stop the machine.
8. Holding the handle pulse with two hands about 5 seconds will show the pulse data.
MANUAL MODE:
1.Under standby mode, press START button directly, the treadmill will work from the speed 1.0km/h,
incline 0. The other windows will start to count from positive direction from windows default, press
“SPEED+”, “SPEED-” change the speed, press “”
、
“INCLINE -”to change the incline;
2. Under standby mode, press “SELECT” button to enter time count down, the TIME window will
display“15
：
00” and glittering. Press “SPEED+”, “SPEED-” , “”
、
“INCLINE –“ to set up the
time what you need. The setting range is 5:00-99:00.
3.In Time setting model, press “SELECT“ button to enter into distance count down, the DISTANCE
window will display “1.0” and glittering. Press “SPEED+”, “SPEED-”, “”
、
“INCLINE –“ to set up
the distance what you need. The setting range is 0.5—99.9.
4. To set up the Distance, press “SELECT” button to enter into calories count down, the CAL window
will display “50’ and glittering. Press “SPEED+”, “SPEED-” , “”
、
“INCLINE –“ to set up the
calories what you need. The setting range is 10-999.
10
Summary of Contents for F40
Page 17: ...EXPLODED DRAWING 17 ...
