TOOL USE AND CARE
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
05
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
04
TOOL SERVICE
OPERATION
Respect the tool as a working implement.
Never engage in horseplay.
Never pull the trigger unless nose is directed
toward the workpiece.
Keep others at a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing injury.
When operating the tool keep tool away from
wet conditions.
Wet tools can cause electrical
shock.
Always inspect electrical cord for damage
before and after use.
A damaged cord can cause
electrical shock.
If you are operating the tool outside use a
extension cord that is rated for outdoor use.
If the user must use the tool in damp
conditions, use a ground fault circuit interrupt-
er (GFCI).
Know this tool.
Read this manual carefully, learn
its applications and limitations, as well as the
specific potential hazards related to this tool.
Only use fasteners that are recommended for
your tool model by the manufacturer.
Do not use
the wrong fasteners or load them incorrectly, as this
can cause jams or damage to the tool.
When you are able to, secure work pieces to a
stable platform using clamps or other tools.
Always have a firm footing and grip on the tool
to counteract any force that may be enacted
during the operation of the tool.
Practice safe working practices and ensure all
relevant legal requirements are being followed
when using this tool.
Never point the tool at the user or others in the
work area.
This could cause serious injury.
The tool should not be forced, use the correct
tool for your application.
The correct tool will do
the job better and safer at the rate for which the tool
is being used.
Before making adjustments, changing
accessories, or storing the tool disconnect the
tool from the battery.
This will reduce the risk of
injury from the power tool.
Remove any adjustment wrenches or keys
before activating the tool.
Leaving adjustment
accessories on the moving parts on the tool will
increase the risk of injury.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the tool
’
s operation.
If
damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
Maintain tool with care.
A properly maintained
tool will function more smoothly and prevent
binding, making it easier to use.
Check operation of the tool before use.
Do not
use the tool if the workpiece contact mechanism is
not working correctly as accidental driving of a
fastener may occur.
Never use this tool in a manner that could
cause a fastener to be directed toward anything
other than the workpiece.
Do not remove,tamper with, or otherwise cause
the trigger to lock or trigger to become inopera-
ble.
Do not operate any tool which has been
modified in a like fashion. Death or serious person-
al injury could result.
Always assume the tool contains fasteners.
Respect the tool; no horseplay.
Avoid using the tool when the magazine is
empty.
Accelerated wear on the tool may occur.
Store the tool away from children or untrained
persons when not in use.
The tool can be
dangerous when used by untrained persons.
Do not use the tool for anything other than its
intended use.
Do not use the tool if the trigger does not
actuate properly.
Any tool that cannot be
controlled with the trigger is dangerous and must
be repaired.
Keep the tool and its handle dry, clean and free
of oil and grease.
Always use a clean cloth when
cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents
to clean your tool.
Never use gasoline or other flammable liquids
to clean the tool.
Never use the tool in the
presence of flammable liquids or gases. Vapors
could ignite by a spark and cause an explosion
which will result in death or serious injury.
Do not use the tool as a hammer.
Never press the trigger of the tool when it is not
intended to be used.
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe.
If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts. STOP and repair
before using or serious injury could occur.
Do not operate the tool if it does not contain a
legible warning label.
Only use accessories that are identified by the
manufacturer for the specific tool model.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of
injury.
Tool service must only be performed by a
qualified repair personnel.
Do not drive fasteners near the edge of the
material. The workpiece may split causing the
fastener to ricochet, injuring you or people in the
work area.
Do not carry the tool from place to place while
holding the trigger. Accidental discharge could
result.
During normal use the tool will recoil immediately
after driving a fastener. This is a normal function of
the tool. Do not attempt to prevent the recoil by
holding the tool against the work. Restriction to the
recoil can result in a second fastener being driven
from the tool. Grip the handle firmly and let the tool
do the work. Failure to heed this warning can result
in serious personal injury.
Do not drive fasteners on top of other fasteners or
with the tool at an overly steep angle as this may
cause deflection of fasteners which could cause
injury.
Do not actuate the tool unless you intend to drive
a fastener into the workpiece.
Always handle the tool with care:
BATTERY AND CHARGER USE AND
CARE
Only use batteries that are recommended for
this tool by the manufacturer.
Use of any other
battery may cause risk of injury or fire.
When the battery is not in use, keep it away
from metal objects that could connect one
terminal to another.
If the terminals are connect-
ed the battery could cause fire or burns.
Keep the battery free of abusive situations, if a
battery is damaged it can eject battery liquid.
If
you come in contact with the battery liquid flush the
contact area with water. If your eye comes in
contact with the battery liquid flush with water and
seek medical help. Battery liquid can cause
irritation or burns.
WARNING:
Do not burn batteries or expose them to
extreme heat. This could cause the
battery to explode.
WARNING:
Do not open the battery for any reason. If
the battery is damaged or cracked do not
insert it into the charger. Electric shock
can be caused by a damaged battery. Be
sure to dispose of all batteries at a
service center for recycling.
WARNING:
Electrocution hazard. Do not touch or
allow conductive objects to touch the
charging terminals. Electric shock or
electrocution could occur.
WARNING:
Do not allow liquid to get into the
charger, electric shock could result.
Do not store batteries in areas that can reach or
exceed 105°F
(such as outside sheds or metal
buildings in the summer).
Only charge the battery with a charger recom-
mended by the manufacturer.
Use of any other
charger may cause risk of injury or fire.
Do not use chargers for anything other than
charging
manufacturer
recommended
batteries, otherwise electric shock could occur.
Do not expose the charger to rain or snow.
Make sure the charger
’
s cord is located in an
area where it will not be damaged.
Extension cords should not be used unless
absolutely necessary.
Improper use of an
extension cord can result in electric shock.
Do not place an object on top of the charger.
This could block ventilation slots and cause
excessive internal heat.
Do not use the charger if it has been subjected
to a hard blow, has been dropped, or damaged
otherwise.
Take the charger to an authorized
repair center.
Do not disassemble the charger.
If the charger
needs to be repaired take it to an authorized repair
center.
Before cleaning the charger make sure to
unplug it from any power source.
This will
reduce the risk of an electrical shock.
Never connect two chargers together.
MODEL: PE20V2118G
MODEL: PE20V2118G
