07
06
Use only a pressure-regulated compressed
air source to limit the air pressure supplied to
the tool.
The regulated pressure must not
exceed 110psi. If the regulator fails, the pressure
delivered to the tool must not exceed 200psi.
Over pressurizing the tool is able to result in
bursting, abnormal operation, breakage of the
tool or serious injury to persons. Use only clean,
dry, regulated compressed air at the rated
pressure or within the rated pressure range as
marked on the tool. Always verify prior to using
the tool that the air source has been adjusted to
the rated air pressure or within the rated air-
pressure range.
◆
Before unloading or making adjustments.
◆
When maintaining the tool.
◆
When clearing a jam.
◆
When touching the safety yoke.
◆
When tool is not in use.
◆
When moving to a different work area.
Such precautionary measures reduce the risk of
injury to persons.
Always disconnect air source:
●
●
LOADING TOOL
Do not load the tool with fasteners when any
one of the operating controls is activated.
Never place a hand or any part of body in
fastener discharge area of tool.
Never point tool at anyone.
Do not pull the trigger or depress the
workpiece contact as accidental actuation
may occur, possibly causing injury.
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
WARNING:
!
UNPACKING
This tool has been shipped completely
assembled.
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please
call
.
1-888-669-5672
●
●
●
●
●
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
WARNING:
!
OPERATION
USING THE BELT HOOK
Loosen and remove the hook screw and nut(A).
Save the screw and nut for future use.
Position the hook in your preferred position.
Using the longer screw packed with hook, fasten
hook to tool.
The tool is packed with a separate hook system.
Assemble the hook on the tool before using the
hook. The hook can be positioned on both left and
right sides.
⒈
⒉
Hook nut (A)
●
FEATURES
360 ADJUSTABLE EXHAUST
OIL-FREE DESIGN
COMFORT-GRIP HANDLE
ERGONOMICALLY ENGINEERED BODY
°
Allows user to direct air away from
.
For less maintenance.
For long lasting durability.
For increased comfort and control.
f
face
Rugged and Comfortable resulting in a light-
weight tool great for extended use.
Keeps interior components debris free, extending
tool life.
Depth is easily adjustable for various
applications.
Allows for easy access clearing in the event of a
jam.
Eliminates damage to working surface.
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
AIR FILTER
ADJUSTABLE DEPTH
QUICK-JAM RELEASE
NON-MARRING SAFETY CONTACT
●
●
●
●
●
●
●
●
FEATURES
SPECIFICATIONS
REQUIRES:
AIR INLET:
MAGAZINE CAPACITY:
WEIGHT:
MAXIMUM PRESSURE:
PRESSURE RANGE:
5.87 SCFM with 100
fasteners per minute @ 90 psi
1/4 inch NPT
100 fasteners, 18 gauge
2.79 lbs
110 psi
60 psi 110 psi
PIN SIZE RANGE:
1/2 inch to 1 5/8 inch
-
-
Compatible with
All Generic 18 Gauge 1/4"
Crown Staples from 1/2" to 1-5/8".
●
●
●
●
MODEL: PST9040Q
MODEL: PST9040Q
HTTP://WWW FREEMANTOOLS COM
1-888-669-5672
.
.
HTTP://WWW FREEMANTOOLS COM
1-888-669-5672
.
.
13mm
1/2”
5/8”
16mm
3/4”
19mm
1”
25mm
1-1/4”
32mm
1/4”(5.7mm)
1-1/2”
38mm
1-5/8”
40mm
Hook
