Quick
Connector
1. Place the Quick Connector onto the
adapter on the end of your pump’s hose.
Or connect directly to tubing.
2. Make sure the Quick Connector is
securely attached to both the
pump’s hose and the Freemie tubing.
3. Attach the Freemie cups to the
other end of the tubing.
See Compatible Pump Diagrams section for further information on how to connect your
Freemie Breast Pump Collection System to your approved compatible pump.
Additionally, review your pump’s User Manual.
Connecting to Your Compatible Pump
Pump
Fitting
Pump
Tubing
Philips Avent & Ameda:
Medela:
Large
Port
Small
Port
This side towards
the pump
1. The large port side (with white
membrane inside) of the barrier connects
to the Freemie cup tubing.
The small port side of the barrier
connects to the pump tubing.
2. Make sure the barrier is
securely attached to both the
pump’s tubing and the cup tubing.
3. Attach the Freemie cups to the
other end of the cup tubing.
Pump
Pump
Two ways to connect
1
2
Proper orientation of barrier
This side towards
Freemie cups
6
