Prior to placing Cups in your bra:
1:
Turn on pump.
2:
Set SUCTION Setting
(pink lights)
to 10.
3:
Set CYCLE Setting
(blue lights)
to 10.
4:
Barrier inside Cup collapses and releases
when assembly is correct.
Add Cups to Pump
4
Test Before Use
5
3.
Join Tubing with Y-Connector.
Double Pumping:
Use
both sides of Y-Connector.
1:
Insert Tubing into large
end of L-Connector.
2:
Firmly press small end of
L-Connector into
round Tubing Port on Flange.
Resting Barrier
Collapsed Barrier
1
2
3
Suction
Cycle
Turbo
Independence
®
II
Single Pumping:
Remove one Tube and cap one side.
Cap
If Barrier does not move, reassemble Cups and check all Tubing connections.
