Snap
Tubing Port (round hole)
Cup Tab
... and press together firmly.
Align Cup Tab with Flange Tubing Port and press together until you hear the Cup “snap” closed.
PAGE 12
Assembling Freemie Cups
STEP 1
STEP 3
CONTINUED
STEP 4
STEP 2
STEP 3
Place Valve onto Valve Base
Insert Barrier into Valve Base.
Press assembled Valve Base onto Flange...
Always wash hands prior to assembling Freemie Cups.
Assemble clean, dry parts just before use.
Inspect Cup and Tubing parts before and after each use.
Replace Valve parts every 2-3 months.
After time and use, you may not always hear a crisp “snap” sound, and this is normal.
Incorrect assembly may cause poor suction or malfunction.
Note: Barrier flaps must overlap edges of Valve Base.
