15
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the exercise bike has been exposed
to cold temperatures, allow it to warm to room
temperature before plugging in the power adapter.
If you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the
receptacle on the
frame of the exer-
cise bike. Plug the
power adapter into
an appropriate outlet
that is properly
installed in accor-
dance with all local codes and ordinances.
HOW TO ADJUST THE PEDAL STRAPS
To loosen the strap
on a pedal, press
the indicated tab
and pull the strap
upward. To tighten
the strap, simply pull
the end of the strap
downward.
HOW TO ADJUST THE SEAT
The seat can be
adjusted forward
or backward to the
position that is the
most comfortable
for you. To adjust
the seat, push
downward on the
seat adjustment
handle, slide the
seat to the desired
position, and then
pull upward on the
handle to lock the
seat in place.
HOW TO LEVEL THE EXERCISE BIKE
If the exercise bike
rocks slightly on
your floor during
use, turn one or
both of the leveling
feet under the rear
stabilizer until the
rocking motion is
eliminated.
HOW TO MOVE THE EXERCISE BIKE
To move the exer-
cise bike, hold the
handle on the rear
stabilizer and care-
fully lift it until the
exercise bike can be
moved on the front
wheels. Carefully
move the exercise
bike to the desired location and then lower it.
Pedal
Strap
Tab
Seat
Handle
Leveling
Feet
Handle
Power Adapter
HOW TO USE THE EXERCISE BIKE
