Freemotion 510 Rear Drive User Manual Download

Page: 23 / 36

HOW TO USE AN IFIT LIVE WORKOUT

You must have an iFit Live module to use an iFit Live

workout.

To purchase an iFit Live module at any time, go to

www.iFit.com or call the telephone number on the

front cover of this manual.

Note: To use an iFit Live module, you must have

access to a computer with an internet connection and a

USB port. You will also need an iFit.com membership.

To use a wireless iFit Live module, you must also have

your own wireless network including an 802.11b router

with SSID broadcast enabled (hidden networks are not

supported).

IMPORTANT: To satisfy exposure compliance

requirements, the antenna and transmitter in the

iFit Live module must be at least 8 in. (20 cm) from

all persons and must not be near or connected to

any other antenna or transmitter.

1. Begin pedaling or press any button on the

console to turn on the console.

See HOW TO TURN ON THE POWER on

page 19.

2. Make sure that the iFit Live module is inserted

in the console.

To use an iFit Live workout, make sure that the iFit

Live module is inserted in the console.

3. Select the iFit Live mode.

To select the iFit Live mode, press the iFit Live

button.

4. Select a user.

If more than one user is registered with your

iFit.com membership, you can switch users in

the iFit Live main screen. Press the increase and

decrease buttons next to the Enter button to select

a user.

5. Select an iFit Live workout.

To select an iFit Live workout, press one of the

iFit Live buttons. Note: Before some workouts will

download, you must go to www.iFit.com and add

them to your schedule.

Press the iFit Live button to download the next

workout in your schedule. Press the My Trainer

button, the My Maps button, the World Tour but-

ton, or the Event Training button to download the

next workout of that type in your schedule. Press

the Compete button to compete in a race that you

have previously scheduled. For more information

about the iFit Live workouts, please see

www.iFit.com.

When you select an iFit Live workout, the dis-

play will show the duration of the workout and the

approximate number of calories you will burn. The

display may also show the name of the workout. If

you select a competition workout, the display may

count down to the beginning of the race.

6. Start the workout.

See step 3 on page 22.

During some workouts, the voice of a personal

trainer will guide you through your workout. You

can select an audio setting for your personal trainer

(see HOW TO CHANGE CONSOLE SETTINGS on

page 25).

To stop the workout at any time, stop pedaling. The

time will flash in the display. To resume the work-

out, simply resume pedaling.

Summary of Contents for 510 Rear Drive





































Search results

Summary of Contents for 510 Rear Drive

Reviews:

Related manuals for 510 Rear Drive

Brands by name

Popular brands

Freemotion 510 Rear Drive, User Manual

Search results

Summary of Contents for 510 Rear Drive

Reviews:

Related manuals for 510 Rear Drive

Brands by name

Popular brands