5
1. Attach the Front Stabilizer (8) to the Frame (1)
with two M10 x 50mm Button Patch Bolts (73),
four M10 Washers (67), and two M10 Locknuts
(74).
1
73
67
74
1
8
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• If a part is not in the hardware kit, check to see if it
has been preassembled. To avoid damaging parts,
do not use power tools for assembly.
• Assembly requires the following tools (not
included):
one adjustable wrench
one 6 mm hex key
Assembly may be easier if you have a socket set
or a set of ratchet wrenches. To avoid damaging
parts, do not use power tools.
ASSEMBLY
67