6
2. Attach the Rear Stabilizer (7) to the Frame (1)
with two M10 x 50mm Button Patch Bolts (73),
four M10 Washers (67), and two M10 Locknuts
(74).
2
73
67
74
1
7
67
3
3. Orient the Handlebar Post (2) as shown.
Loosen the Post Knob (32) on the front of the
Frame (1) and pull it outward. Then, insert the
Handlebar Post (2) into the Frame.
Move the Handlebar Post (2) upward or down-
ward to the desired position, release the Post
Knob (32) into an adjustment hole in the
Handlebar Post, and then tighten the Post
Knob. Make sure that the Post Knob is firmly
engaged in an adjustment hole.
32
2
Holes
1
