7
5
5. Place the exercise bike in the location where
it will be used. Tip: Place a mat beneath the
exercise bike to protect the floor.
Make sure that all four Leveling Feet (29) are in
contact with the floor.
If the Leveling Feet (29) are not in contact with
the floor, loosen or tighten the Leveling Feet on
the Rear and Front Stabilizers (7, 8) until all four
Leveling Feet contact the floor.
29
7
8
29
29
6. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over.
4
15
14
85
4. Identify the Right Pedal (15), which is marked
with an “R.”
Using an adjustable wrench, firmly tighten
the Right Pedal (15) and a Pedal Washer (85)
clockwise into the Right Crank Arm (14).
Tighten the Left Pedal (not shown) and a Pedal
Washer (not shown) counterclockwise into the
Left Crank Arm (not shown).