10
8. Identify the Right Rear and Front Arm Covers
(24, 26), and orient them as shown.
Press the Right Rear and Front Arm Covers
(24, 26) together around the Right Upper Body
Arm (19) and attach them with six M4 x 12mm
Screws (102); start all the Screws, and then
tighten them.
Repeat this step on the left side of the
elliptical.
9. Identify the Right Outer and Inner Pivot Covers
(29, 56), and orient them as shown.
Press the Right Outer and Inner Pivot Covers
(29, 56) together around the Right Upper Body
Arm (19) and attach them with two M4 x 12mm
Screws (102) and two M4 x 16mm Truss Screws
(115); start all the Screws, and then tighten
them.
Repeat this step on the left side of the
elliptical.
8
9
102
102
24
26
19
19
29
56
115
102
102
Summary of Contents for e8.9b
Page 26: ...26 NOTES ...