21
HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to access information and to view and change de-
fault settings. Follow the steps below to use the main-
tenance mode.
1. Plug in the power cord or begin pedaling to ac-
tivate the console.
See HOW TO ACTIVATE THE CONSOLE on page
11.
2. Hold down the CLEAR button and the ENTER
button simultaneously for a few seconds to se-
lect the maintenance mode.
When the maintenance mode is selected, the
words “MAINTENANCE MODE” will appear in the
main display for a moment.
3. View the total number of hours that the exercise
cycle has been used.
When the words “MAINTENANCE MODE” disap-
pear, the main display will show the total number of
hours that the exercise cycle has been used.
4. Press the ENTER button and view the total dis-
tance pedaled on the exercise cycle.
When the button is pressed, the main display will
show the total distance pedaled on the exercise
cycle.
5. Press the ENTER button again and set a maxi-
mum program time for the programs.
The maximum program time for the programs can
be from 10 minutes to 90 minutes. To change the
maximum program time, press the + and – buttons
beside the ENTER button.
6. Press the ENTER button again and select a lan-
guage for the main display.
The main display can display text messages in
English, International English, German, Spanish,
Italian, or French. To change the language, press
the + and – buttons beside the ENTER button.
7. Press the ENTER button again and select the
desired system of measurement.
The console can display data using the English
system (miles and pounds) or the metric system
(kilometers and kilograms). To change the system
of measurement, press the + and – buttons beside
the ENTER button.
8. Press the ENTER button again and set the
length of time that will elapse before the con-
sole will turn off or enter the idle mode.
If the exercise cycle is used without a power cord,
and if the pedals are stationary for a period of time,
the console will turn off. If the exercise cycle is
used with a power cord, and if the pedals are sta-
tionary for a period of time, the console will enter
an idle mode and the words “PLEASE SELECT A
PROGRAM TO BEGIN” will begin to scroll across
the main display.
To set the length of time that will elapse before the
console will turn off or enter the idle mode, press
the + and – buttons beside the ENTER button. The
length of time can be from 15 seconds to 2 min-
utes.
9. Hold down the ENTER button and the CLEAR
button simultaneously for a few seconds to exit
the maintenance mode.
To exit the maintenance mode at any time, hold
down the ENTER button and the CLEAR button si-
multaneously for a few seconds.