![background image](http://html1.mh-extra.com/html/freemotion/fmpw11-0/fmpw11-0_user-manual_2330266026.webp)
26
How to Save Custom Console Settings
The following custom console settings can be saved to
a USB drive:
• Unit of measurement
• Backlight duration
• Contrast level
• Auto pause setting
• USB port setting
The custom console settings will be saved in an
import.cfg file format.
1. Make sure that the USB port on the console is
enabled (see step 3 on page 24).
2. Insert your USB drive into the USB port on the
console.
3. Select the SAVE CFG
menu option on the
firmware menu. The
console will begin sav-
ing the custom console
settings to the USB
drive and the word SAVE--- will appear in the mes-
sage banner.
4. If the custom console settings are saved success-
fully to the USB drive, the word DONE will appear
in the message banner.
5. If the custom console settings are not saved to
the USB drive, the word FAILED will appear in the
message banner.
Go to TROUBLESHOOTING on
page 29.
How to Import Custom Console Settings
You can import saved custom console settings from a
USB drive to the console.
1. Make sure that the USB port on the console is
enabled (see step 3 on page 24).
2. Make sure that the desired custom console settings
file (import.cfg) is saved on your USB drive (see
HOW TO SAVE CUSTOM CONSOLE SETTINGS
at the left).
3. Insert your USB drive into the USB port on the
console.
4. Select the IMPRT
CFG menu option on
the firmware menu.
The console will begin
importing the custom
console settings to the
console and the word IMPRT--- will appear in the
message banner.
Tip: You can also use this shortcut to select the
IMPORT CFG menu option: Press and hold the
Backlight and STAGE buttons for 3 seconds.
5. If the custom console settings are imported suc-
cessfully to the console, the word DONE will
appear in the message banner.
6. If the custom console settings are not imported to
the console, the word FAILED will appear in the
message banner.
Go to TROUBLESHOOTING on
page 29.