30
HOW TO ENABLE OR DISABLE THE SAFETY KEY
If your INCLINE TRAINER is connected to a 120-volt
circuit, you can disable the safety key so the INCLINE
TRAINER does not require the use of a key.
If your
INCLINE TRAINER is connected to a 220-volt cir-
cuit, you cannot disable the safety key.
1. Remove the key from the console.
Make sure the key is not inserted into the console;
the main display will appear blank.
2. Hold down the ENTER button and the CLEAR
button simultaneously for two seconds to se-
lect the maintenance mode.
When the maintenance mode is selected, the
words MAINTENANCE MODE will appear in the
main display.
3. Press the ENTER button repeatedly to enable
or disable the safety key.
Press the ENTER button repeatedly until the words
SAFETY KEY ENABLED appear in the main dis-
play.
To allow the INCLINE TRAINER to be used without
the safety key, press the + or – button until the
words SAFETY KEY DISABLED appear. Note: The
next time the key is inserted into the console, the
safety key will automatically be enabled and the
console will require the use of the safety key again.
To require the use of the safety key with the con-
sole, press the + or – button above the ENTER
button until the words SAFETY KEY ENABLED ap-
pear in the main display, or insert the key into the
console.
4. Hold down the ENTER button and the CLEAR
button simultaneously for two seconds to exit
the maintenance mode.
To exit the maintenance mode, hold down the
ENTER button and the CLEAR button simultane-
ously for two seconds.
Before moving the incline trainer, unplug the power
cord.
Due to the size and weight of the incline trainer,
moving it requires two or three persons. Hold the
metal frame firmly in the location shown at the right.
CAUTION: To decrease the possibility of damage to
the incline trainer or of injury, do not lift the frame
by the front cover.
Carefully roll the incline trainer on
the wheels to the desired location and then lower it back
to the level position.
CAUTION: To reduce the risk of
injury, use extreme caution while moving the incline
trainer. Do not attempt to move the incline trainer
over uneven surfaces.
Frame
Front
Cover
Wheels
HOW TO MOVE THE INCLINE TRAINER