21
HOW TO SET UP THE CONSOLE
Before using the incline trainer for the first time, set up
the console.
1. Connect to your wireless network.
To access the internet, download iFit workouts, and
use other features of the console, you must be con-
nected to a wireless network. See HOW TO USE
THE WIRELESS NETWORK MODE on page 30 to
connect the console to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 27 and step 2 on page 29
and select the maintenance mode. Then, see step
3 on page 29 and check for firmware updates.
3. Calibrate the incline system.
See step 4 on page 29 and calibrate the incline
system of the incline trainer.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit button.
For information about navigating in the browser,
see page 31. The browser will open to the iFit.com
home page. Touch the Register button in the
upper-right corner of the screen.
The browser will open to the iFit.com registration
page. Follow the prompts on the screen to create
your iFit account.
To use the manual mode,
see page 22.
To use an
onboard workout,
see page 24.
To use a set-a-goal
workout,
see page 25.
To use an iFit workout,
see
page 26.
To use the equipment settings mode,
see page 27.
To use the entertainment mode,
see page 28.
To
use the maintenance mode,
see page 29.
To use
the wireless network mode,
see page 30.
To use the
internet browser,
see page 31.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the incline trainer. The first time you
use the incline trainer, observe the alignment of the
walking belt, and center the walking belt if neces-
sary (see pages 37 and 38).
