22
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
20.
Note: It may take a minute for the console to
be ready for use.
2. Select the main menu.
When you turn on the power, the main menu will
appear after the console boots up. Touch the home
button in the lower-left corner of the screen to
return to the main menu at any time.
3. Start the walking belt and adjust the speed.
Touch the Start button on the screen or press the
Start button on the console to start the walking belt.
The walking belt will begin to move at 1 mph. As
you exercise, change the speed of the walking belt
as desired by pressing the Speed increase and
decrease buttons. Each time you press one of the
buttons, the speed setting will change by 0.1 mph.
If you press one of the numbered Speed buttons,
the walking belt will gradually change speed until
it reaches the selected speed setting. To select a
speed setting that includes a decimal—such as 3.5
mph—press two numbered buttons in succession.
For example, to select a speed setting of 3.5 mph,
press the 3 button and then immediately press the
5 button.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button.
4.
Change the incline of the incline trainer as
desired.
To change the incline of the incline trainer, press
the Incline increase and decrease buttons or one of
the numbered Quick % Grade buttons. Each time
you press one of the buttons, the incline will gradu-
ally change until it reaches the selected incline
setting.
Note: The first time you adjust the incline, you must
first calibrate the incline system (see step 4 on
page 29).
5. Monitor your progress.
The console
offers sev-
eral display
modes. The
display mode
that you select
will determine
which workout
information is
shown. To select the desired display mode, simply
flick or slide the screen. You can also view addi-
tional information by touching the red boxes on the
screen.
As you walk or run on the incline trainer, the screen
can show the following workout information:
• The incline level of the incline trainer
• The time elapsed
•
The time left (the manual mode does not have a
time left countdown)
•
The approximate number of calories you have
burned
•
The approximate number of calories you are
burning per hour
• The distance that you have walked or run
• The number of vertical meters you have climbed
•
The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace in minutes per kilometer
• Your current lap number
• Your heart rate (see step 6)
