12
10. If necessary, move the treadmill to the desired
location (see HOW TO MOVE THE TREADMILL
on page 28).
After the treadmill is placed in the location where
it will be used, make sure that the Leveling Feet
(64) rest firmly on the floor. If the treadmill rocks
even slightly, loosen one of the 1/2" Nuts (36) on
a Leveling Foot, turn the Leveling Foot clockwise
or counterclockwise until the rocking motion is
eliminated, and then retighten the Nut.
64
10
11.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 34 and 35).
36
18
9
Handrail
Assembly
105
9. Attach the Upright Collar (105) to the handrail
assembly with two #8 x 5/8" Screws (18).
18
27
8. Tighten four 3/8" x 2 3/4" Screws (27) with two
3/8" Star Washers (2) into the handrail assembly.
8
27
2
2
Handrail
Assembly
