12
NOTES
5
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires an adjustable wrench
.
Note: If a part is not in the hardware kit, check to see if it has been preattached.
1. Identify the Rear Stabilizer (11), which does not
have wheels.
Attach the Rear Stabilizer (11) to the Frame (1)
with two M8 x 40mm Bolts (9), four M8 Washers
(10), and two M8 Locknuts (13).
2. Attach the Front Stabilizer (12) to the Frame (1)
with two M8 x 40mm Bolts (9), four M8 Washers
(10), and two M8 Locknuts (13).
1
9
10
9
10
10
11
12
1
1
13
10
13
2