11
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to warm to
room temperature before plugging in the power
adapter. If you do not do this, you may damage
the console displays or other electronic compo-
nents.
Plug the power
adapter into the jack
on the front of the
exercise cycle. Plug
the power adapter
into an appropriate
outlet that is properly
installed in accor-
dance with all local
codes and ordinances.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired position,
and then press the
ends of the straps
onto the tabs.
HOW TO ADJUST THE SEAT
The seat can be
adjusted forward or
backward to the
position that is the
most comfortable
for you. To adjust
the seat, pull
upward on the seat
adjustment handle,
slide the seat to the
desired position,
and then push
downward on the
handle to lock the
seat in place.
HOW TO LEVEL THE EXERCISE CYCLE
If the exercise cycle
rocks slightly on
your floor during
use, turn one or
both of the leveling
feet under the rear
stabilizer until the
rocking motion is
eliminated.
HOW TO MOVE THE EXERCISE CYCLE
To move the exer-
cise cycle, hold the
handle on the rear
stabilizer and care-
fully lift it until the
exercise cycle can
be moved on the
front wheels.
Carefully move the
exercise cycle to
the desired location
and then lower it.
Pedal
Strap
Tab
Seat
Handle
HOW TO USE THE EXERCISE CYCLE
Leveling Foot
Handle
Power Adapter
