Freemotion t 6.4, User Manual

26

   IMPORTANT: You must still unplug the power 

cord after using the treadmill. Set the update 

time for a time when you normally use the 

treadmill and will be available to unplug the 

power cord after an update.

7.  Turn on or turn off the display demo mode.

The console features a display demo mode, 

designed to be used if the treadmill is displayed 

in a store. While the demo mode is turned on, the 

console will function normally when you plug in 

the power cord, press the power switch into the 

reset position, and insert the key into the console. 

However, when you remove the key, the screen will 

show a demo presentation. 

   To turn on or turn off the display demo mode, first 

touch the Demo Mode button. Next, touch the On 

checkbox or the Off checkbox. Then, touch the 

back button on the screen.

8.  Enable or disable the Internet browser.

   To enable or disable the Internet browser, first 

touch the Browser button. Next, touch the Enable 

checkbox or the Disable checkbox. Then, touch the 

back button on the screen.

9.  Enable or disable street view.

   During some workouts, the screen may show a 

map. To enable or disable the street view feature of 

the maps, first touch the Street View button. Next, 

touch the Enable checkbox or the Disable check

-

box. Then, touch the back button on the screen.

10. Enable or disable the key.

Note: This feature may not be enabled on your 

treadmill.

You can disable the key so that the treadmill does 

not require the use of the key, if desired. Touch the 

Safety Key button. To disable the key, touch the 

Disable checkbox.

 CAUTION: Read the safety 

warning on the screen before disabling the 

key. 

To enable the key again, touch the Enable 

checkbox.

11. Enable or disable a passcode.

The console features a child-safety passcode, 

designed to prevent unauthorized users from using 

the treadmill.

Touch the Passcode button. To enable a pass-

code, touch the Enable checkbox. Then, enter a 

4-digit passcode of your choice. Touch Save to use 

this passcode. Touch Cancel to return to the equip

-

ment settings mode and not use a passcode. To 

disable the passcode, touch the Disable checkbox.

   Note: If a passcode is enabled, the console will 

regularly ask for you to enter the passcode. The 

console will remain locked until the correct pass-

code is entered.

 IMPORTANT: If you forget your 

passcode, enter the following master passcode 

to unlock the console: 1985.

12. Exit the equipment settings mode.

To exit the equipment settings mode, touch the 

back button on the screen or press the settings but-

ton on the console.

HOW TO USE THE MAINTENANCE MODE

1.  Select the settings main menu.

  See step 1 on page 25.

2.  Select the maintenance mode.

   In the settings 

main menu, 

touch the 

Maintenance 

button to enter 

the mainte-

nance mode.

   The maintenance mode main screen will show 

information about the model and version of the 

treadmill.