Freemotion t 6.4, User Manual

27

3.  Update the console firmware.

   For the best results, regularly check for firm-

ware updates.

   Touch the Firmware Update button to check for 

firmware updates using your wireless network. The 

update will begin automatically.

   To avoid damaging the treadmill, do not turn off 

the power or remove the key while the firmware 

is being updated.

   The screen will show the progress of the update. 

When the update is complete, the treadmill will turn  

off and then turn back on. If it does not, press the 

power switch into the off position. Wait for several 

seconds, and then press the power switch into the 

reset position. Note: It may take a few minutes for 

the console to be ready for use.

   Note: Occasionally, a firmware update may cause 

your console to function slightly differently. These 

updates are always designed to improve your exer

-

cise experience.

4.   Calibrate the incline system of the treadmill.

   Touch the Calibrate Incline button. Then, touch 

the Begin button to calibrate the incline system. 

The treadmill will automatically rise to the maxi

-

mum incline level, lower to the minimum incline 

level, and then return to the starting position. This 

will calibrate the incline system. Press the Cancel 

button to return to the maintenance mode. When 

the incline system is calibrated, touch the Finish 

button.

   IMPORTANT: Keep pets, feet, and other objects 

away from the treadmill while the incline sys-

tem is calibrating. In an emergency, pull the key 

from the console to stop the incline calibration.

5.  View machine information.

   Touch the Machine Info button to view information 

about your treadmill. After you view the information, 

touch the back button on the screen.

6.  Find keycodes.

   The Keycodes button is intended to be used by 

service technicians to identify whether a certain 

button is working correctly.

7.  Exit the maintenance mode.

   To exit the maintenance mode, touch the back but

-

ton on the screen.

HOW TO USE THE WIRELESS NETWORK MODE

The console features a wireless network mode that 

allows you to set up a wireless network connection.

1.  Select the settings main menu.

  See step 1 on page 25.

2.  Select the wireless network mode.

In the settings main menu, touch the Wireless 

Network button to enter the wireless network mode.

3.  Enable Wi-Fi.

Make sure that the Wi-Fi checkbox is marked with 

a green checkmark. If it is not, touch the Wi-Fi 

menu option once and wait for a few seconds. The 

console will search for available wireless networks.

4.   Set up and manage a wireless network  

connection.

When Wi-Fi is enabled, the screen will show a list 

of available networks. Note: It may take several 

seconds for the list of wireless networks to appear.

Make sure that the checkbox on the Network 

notification menu option is marked with a green 

checkmark to have the console notify you when a 

wireless network is within range and available.

Note: You must have your own wireless network 

and an 802.11b/g/n router with SSID broadcast 

enabled (hidden networks are not supported).