8
4
5
101
102
56
79
111
111
18
18
18
1
1
79
4. Hold the Left Front Shield (101) against the left
side of the Frame (1). Insert the left side of the
Wiring Plate (18) into the Left Front Shield.
Attach the Left Front Shield (101) with two
M4 x 12mm Self-tapping Screws (79); do not
fully tighten the Self-tapping Screws yet.
5. Hold the Right Front Shield (102) against the
right side of the Frame (1). Insert the right side of
the Wiring Plate (18) into the Right Front Shield.
Attach the Right Front Shield (102) with two
M4 x 12mm Self-tapping Screws (79) and two
M4 x 16mm Screws (56); do not fully tighten
the Screws yet.
6
6. Tip: Avoid pinching the wires. Attach the
Wiring Plate (18) to the Frame (1) with four
M5 x 12mm Screws (111); start all the Screws,
and then tighten them.
Avoid pinching
the wires
1
Summary of Contents for u 8.9b
Page 27: ...27 NOTES...
