11
10
100
10. Tip: To avoid pinching the wires, make sure
that the wires (C) from the Handlebar (70) are
arranged as shown.
Attach the Accessory Tray (99) to the Upright
(66) with two M5 x 12mm Screws (111); start
both Screws, and then tighten them.
11. Tip: Avoid pinching the wires. Attach the Rear
Upright Cover (100) to the Accessory Tray (99)
and to the Upright (66) with four M5 x 12mm
Screws (111); start all the Screws, and then
tighten them.
66
70
111
111
99
99
66
11
Avoid pinching
the wires
C
Avoid pinching
the wires
Summary of Contents for U8.1
Page 31: ...31 NOTES...
