6
1
1
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• If a part is not in the hardware kit, check to see if
it has been preassembled.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
• Assembly can be completed using the included
tools.
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1. Have a second person hold the Upright (66) near
the Frame (1).
See the inset drawing. Connect the Upper Main
Wire (42) to the Lower Main Wire (69), connect
the Upper Power Wire (63) to the Lower Power
Wire (64), and connect the Upper TV Coaxial
Cable (68) to the Lower TV Coaxial Cable (67).
See the inset drawing. Locate the covers (A, B)
on the Lower TV Coaxial Cable (67) and on the
Upper TV Coaxial Cable (68). Slide the covers
together and push the small cover (A) into the
large cover (B).
Then, insert the excess wire into the
Upright (66).
B
A
66
42
69
63
68
64
67
Summary of Contents for U8.1
Page 31: ...31 NOTES...
