7
3
84
35
1
2
66
1
107
107
108
108
Avoid pinching
the wires
2. Tip: Avoid pinching the wires. Attach
the Upright (66) to the Frame (1) with four
M8 x 20mm Screws (107) and four M8 x 12mm
Washers (108); start all the Screws, and then
tighten them.
3. Loosen the Adjustment Knob (35) and pull it
outward. Then, insert the Seat Post (84) into the
Frame (1), and release the Adjustment Knob.
Move the Seat Post upward or downward
slightly to make sure that the Adjustment
Knob is engaged in one of the adjustment
holes in the Seat Post. Then, tighten the Seat
Post Knob.
Summary of Contents for U8.1
Page 31: ...31 NOTES...