71
Quick Setup | IP Setting | DHCP Client
DHCP Client
is the default option. If you are not very sure
about the IP setting for the MPES-4, choose DHCP Client
mode. The MPES-4 will use an assigned IP address from
your network router or gateway. Otherwise, MPES-4 will
intelligently try all possible IP settings in the cache memory
to connect your MPES-4 to the network.
DHCP
Dynamic Host Configuration Protocol.
1. Select
DHCP Client
.
2. Click
Save
button to save the entered values.
Click
Cancel
button to restore all previous values.
3. The
Apply
button will blink after
Save
. Please click
Apply
button to apply all the changes if necessary. All
the changes will be applied after reboot.
The MPES-4 has a DHCP server embedded. That means by enabling the router mode, the MPES-4 will assign a
dynamic IP to the device connected to the Configuration port of your MPES-4.