8.
Lap Safety Belt:
Your seat is fitted with a safety belt to prevent
you from slipping forwards under braking
conditions or when going down a slope or
over obstacles, always use it-even for short
journeys.
The lap belt can be adjusted on one side to
fit comfortably around your waist. To fit
simply connect the two buckles together until
a distinct "click" is heard. To remove simply "press" the red buckle and the two belts will
separate.
Caution:
Care should be taken when the belt is not in use, it should be connected
together and placed in the centre of the seat cushion. Failure to observe this notice could
lead to the two buckles falling onto and damaging the bodywork, catching a person or
foreign body.
HANDLEBAR ADJUSTMENT
The handlebar of your is designed to allow you to position it in a comfortable driving position. It
can be locked into numerous positions or unlocked to move freely for transportation.
The handlebar lock is operated by a black
lever positioned on the right hand side of the
handlebar. To release the handlebar from a
locked position pull the black lever upwards,
the handlebar will now move freely, but under
mild tension. To lock the handlebar into a
comfortable driving position, simply push the
black lever downwards until the handlebar
is locked firmly into position. With the
combination of the seat adjustment together with the handlebar movement, you should find a
suitably comfortable driving position.
Warning:
ALWAYS
make certain the handlebar locking lever is fully down and the
handlebar is securely clamped onto the chrome support plates before driving your
scooter. For service adjustment of this part, refer to the "
Care and Maintenance
"
section of this manual.
！
10
Summary of Contents for 510GDX
Page 44: ...28 ...
