CARE & MAINTENANCE
Your scooter, like any other electro-mechanical machine, will benefit from regular servicing by
your dealer. You too, can help keep your scooter in good condition by following a simple guide to
home maintenance.
Note: Only competent people should carry out service work.
SEAT UPHOLSTERY
A damp cloth and a little soapy water will keep your seat, backrest and arms looking smart.
DO NOT
use abrasive cleaners as this will damage the coating. Upholstery can be damaged by
chemical cleaners.
The coating material can also degrade over a period of time due to contamination by natural oils
in the hair and skin or from medicated power products. Ultra-violet light can also reduce the life
of the upholstery coating material. This is a normal ageing process and cannot be guaranteed.
BODYWORK
The painted bodywork on your scooter can be lightly washed with clean soapy water.
DO NOT
use abrasive cleaners or strong detergents. This could fade the color; shampoo for automobile
works well. Remove salt contact as this is very corrosive to bright metal parts.
On the painted finish, be cautious not to wash with a dirty cloth as this could scratch the paint
finish. Auto polish can be used to keep the paintwork and bright chrome parts in pristine
condition.
The metal framework of your scooter should be cleaned twice a year and any paintwork damaged
should be treated to prevent further attack from the elements. Wash regularly if contact is made
with road or sea salt, this is very corrosive.
DO NOT
store your scooter in damp conditions. This may affect the electronics if left for very
long periods of time. Moisture, if left unattended can cause deterioration on metal work, protect
with proprietary cleaners.
ELECTRONICS
Servicing of the drive electronics and charger should only be carried out by your local service
dealer. These units are sealed and should not be opened.
BROKEN SEALS WILL INVALIDATE YOUR GUARANTEE.
DO NOT
operate your scooter in exceptional weather conditions, ie. very heavy rain or wind.
Cover your machine up if it is to be left unattended and outside for a long period of time.
DO NOT
drive through deep water with your scooter. This could damage the electronic speed
controller. Sea and road salts are very corrosive and should be neutralized quickly.
MOTOR
The motor on your scooter is fitted with four long-life brushes. The brushes should be inspected
for wear every 12 months or more frequently if you use you scooter daily for long periods. The
brushes should be changed when they have worn down to approximately 8 mm in length.
Caution:
DO NOT
hose down your scooter with a powerful cleaner. Water could be
forced into the electronics and cause permanent damage.
26
Summary of Contents for 510GDX
Page 44: ...28 ...
