OPERATING YOUR SCOOTER
Before setting out on your scooter you need to make sure that your seat is in the
correct driving position. The seat has three basic adjustments to assist your comfort.
1.Mirror assemble:
2.Seat Lock Lever:
This allows the seat to swivel through 360 degree: Pull up fully to release the
seat allowing rotation. Release lever to lock the seat into the desired position. .
Caution:
The seat locking lever must be locked in place and be lifted up fully when
rotating the seat, failure to observe this may result in unnecessary wear of the seat
post.
Removing seat from Scooter:
The seat mounting post is designed with a special safety lifting point, this will prevent
the seat from inadvertently coming off, It can only be removed by turning the 90
degree from the forward driving position.
8
14mm
wrench