Chapter 14 Enhanced Capture Timer (ECT16B8CV3)
MC9S12XE-Family Reference Manual , Rev. 1.19
536
Freescale Semiconductor
14.3.2.7
Timer Toggle On Overflow Register 1 (TTOV)
Read or write: Anytime
All bits reset to zero.
4
TFFCA
Timer Fast Flag Clear All
0 Allows the timer flag clearing to function normally.
1 A read from an input capture or a write to the output compare channel registers causes the corresponding
channel flag, CxF, to be cleared in the TFLG1 register. Any access to the TCNT register clears the TOF flag
in the TFLG2 register. Any access to the PACN3 and PACN2 registers clears the PAOVF and PAIF flags in the
PAFLG register. Any access to the PACN1 and PACN0 registers clears the PBOVF flag in the PBFLG register.
Any access to the MCCNT register clears the MCZF flag in the MCFLG register. This has the advantage of
eliminating software overhead in a separate clear sequence. Extra care is required to avoid accidental flag
clearing due to unintended accesses.
Note:
The flags cannot be cleared via the normal flag clearing mechanism (writing a one to the flag) when
TFFCA = 1.
3
PRNT
Precision Timer
0 Enables legacy timer. Only bits DLY0 and DLY1 of the DLYCT register are used for the delay selection of the
delay counter. PR0, PR1, and PR2 bits of the TSCR2 register are used for timer counter prescaler selection.
MCPR0 and MCPR1 bits of the MCCTL register are used for modulus down counter prescaler selection.
1 Enables precision timer. All bits in the DLYCT register are used for the delay selection, all bits of the PTPSR
register are used for Precision Timer Prescaler Selection, and all bits of PTMCPSR register are used for the
prescaler Precision Timer Modulus Counter Prescaler selection.
Module Base + 0x0007
7
6
5
4
3
2
1
0
R
TOV7
TOV6
TOV5
TOV4
TOV3
TOV2
TOV1
TOV0
W
Reset
0
0
0
0
0
0
0
0
Figure 14-10. Timer Toggle On Overflow Register 1 (TTOV)
Table 14-8. TTOV Field Descriptions
Field
Description
7:0
TOV[7:0]
Toggle On Overflow Bits
— TOV97:0] toggles output compare pin on timer counter overflow. This feature only
takes effect when in output compare mode. When set, it takes precedence over forced output compare but not
channel 7 override events.
0 Toggle output compare pin on overflow feature disabled.
1 Toggle output compare pin on overflow feature enabled.
Table 14-7. TSCR1 Field Descriptions (continued)
Field
Description
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
S12XE
products
in
208
MAPBGA
packages
