Chapter 29 1024 KByte Flash Module (S12XFTM1024K5V2)
MC9S12XE-Family Reference Manual , Rev. 1.19
1152
Freescale Semiconductor
29.3.2.1
Flash Clock Divider Register (FCLKDIV)
The FCLKDIV register is used to control timed events in program and erase algorithms.
All bits in the FCLKDIV register are readable, bits 6–0 are write once and bit 7 is not writable.
CAUTION
The FCLKDIV register should never be written while a Flash command is
executing (CCIF=0).
Offset Module Base + 0x0000
7
6
5
4
3
2
1
0
R
FDIVLD
FDIV[6:0]
W
Reset
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 29-5. Flash Clock Divider Register (FCLKDIV)
Table 29-8. FCLKDIV Field Descriptions
Field
Description
7
FDIVLD
Clock Divider Loaded
0 FCLKDIV register has not been written
1 FCLKDIV register has been written since the last reset
6–0
FDIV[6:0]
Clock Divider Bits
— FDIV[6:0] must be set to effectively divide OSCCLK down to generate an internal Flash
clock, FCLK, with a target frequency of 1 MHz for use by the Flash module to control timed events during program
and erase algorithms.
shows recommended values for FDIV[6:0] based on OSCCLK frequency.
Please refer to
Section 29.4.1, “Flash Command Operations
,
”
for more information.
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
S12XE
products
in
208
MAPBGA
packages
