KIT34825EPEVME Evaluation Board
, Rev. 2.0
14
Freescale Semiconductor
Software Description
Figure 13. The Files in The GUI Software Folder
5.3
Using the GUI Software
The GUI has two windows. The window on the left side is a cell phone window and the window on the
right side is an information window, as shown in
. When the software is started, the GUI shows
the cell phone window first. The information displayed in the cell phone window is dependent on the
accessory that is attached to the mini-USB connector of the evaluation board. The information window
contains detailed information about 34825 and the status of the evaluation board.
This section explains each portion of the two windows in details.
5.3.1
System buttons
At the top of the cell phone window, there are two system buttons, as shown in
. The one on
the right is the
close
button to exit the GUI software when clicked. The one on the left side is a
Show/Hide
button, when clicked, to show or hide the information window.
5.3.2
Status information
The status information is located at the bottom of the information window. This is for indicating the status
of the evaluation board. If the evaluation board is connected and recognized by the OS, a message “
The
34825 Evaluation Board Is Connected!
” and the version number of the evaluation board firmware will
be shown. The evaluation system is ready to work. If the evaluation board is not connected to the PC
when the software is running, the message shown will be “
The 34825 Evaluation Board Is not Found.
Please Check and Connect the Evaluation Board!
” Whenever the evaluation board is connected while
the GUI software is running, the PC software will recognize the evaluation board automatically and
display the first message.
