3.2
Connecting the Mini-ITX Lite Baseboard to your PC
Figure 3.2 – Connecting the Mini ITX Lite Baseboard to your PC
1. Connect the null-modem serial cable (
supplied in the kit)
to the serial port connector on the
baseboard and to a COM port on the Host PC.
2. Connect the regulated 5V power supply to the appropriate power adapter. Plug the power
adapter into the power outlet and the 5V line output connector into the power connector on the
baseboard.
3.3 Power
Supply
The Fire Engine is equipped with 2 options for providing power:
■
2.1 mm barrel connector with a positive center tap
■
Standard ATX power supply receptacle
Note: Do not connect more than one power supply at a time. The use of some PCI expansion
cards may require a separate ATX power supply due to power requirements of the card. See
Mini-ITX Lite Hardware Specification
for power supply rating
Zoom ColdFire Lite QuickStart Guide
7
