manualshive.com logo in svg

Freescale Semiconductor MC9S12ZVHL32, Reference Manual

The Freescale Semiconductor MC9S12ZVHL32 is a powerful microcontroller designed for automotive applications. For a comprehensive understanding of its features and functionalities, make sure to download the free Reference Manual from 88.208.23.73:8080. This manual provides detailed instructions for maximizing the performance of this cutting-edge product.

Share
Download
background image

 

S12ZVHY/S12ZVHL Family Reference Manual Rev. 1.05 

Freescale Semiconductor 

    

3

Chapter 1

Device Overview MC9S12ZVHY/MC9S12ZVHL Families

1.1

Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1.2

Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

1.2.1 MC9S12ZVHY/MC9S12ZVHL Families Member Comparison  . . . . . . . . . . . . . . . . . . 24

1.3

Maskset 0N39G and 1N39G device compare   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1.4

Chip-Level Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1.5

Module Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

1.5.1 S12Z Central Processor Unit (CPU)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1.5.2 Embedded Memory  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1.5.3 Clocks, Reset & Power Management Unit (CPMU)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1.5.4 Main External Oscillator (XOSCLCP)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1.5.5 32K External Oscillator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1.5.6 System Integrity Support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1.5.7 Real Time Clock (RTC)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1.5.8 Timer (TIM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.5.9 Pulse Width Modulation Module (PWM)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.5.10 Simple Sound Generator (SSG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.5.11 Liquid Crystal Display driver (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.5.12 LIN physical layer transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.5.13 Stepper Motor Controller (MC)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1.5.14 Stepper Stall Detect (SSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1.5.15 Multi-Scalable Controller Area Network (MSCAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1.5.16 Inter-IC Bus Module (IIC)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.5.17 Serial Communication Interface Module (SCI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.5.18 Serial Peripheral Interface Module (SPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.5.19 Analog-to-Digital Converter Module (ADC)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.5.20 Supply Voltage Sensor (BATS)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1.5.21 On-Chip Voltage Regulator system (VREG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

1.6

Block Diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

1.6.1 Device Memory Map  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1.6.2 Part ID registers Assignments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

1.7

Signal Description and Device Pinouts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

1.7.1 Pin Assignment Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.7.2 Detailed Signal Descriptions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
1.7.3 VSENSE - Voltage Sensor Input  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.7.4 BCTL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.7.5 Power Supply Pins  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

1.8

Package and Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

1.9

Modes of Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

1.9.1 Chip Configuration Modes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
1.9.2 Debugging Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
1.9.3 Low Power Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

1.10 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

1.10.1 Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Summary of Contents for MC9S12ZVHL32











































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MC9S12ZVHL32

We Care Solar Suitcase Installation Manual preview
Suitcase
Brand: We Care Solar Pages: 46
YOKOGAWA TC 10-L Engineering Manual preview
TC 10-L
Brand: YOKOGAWA Pages: 20
YOKOGAWA UTAdvanced UT32A Technical Information preview
UTAdvanced UT32A
Brand: YOKOGAWA Pages: 3
American Lighting TRULUX DMX 3Z Touch Control Installation Instructions Manual preview
TRULUX DMX 3Z Touch Control
Brand: American Lighting Pages: 2
Cruisair TWLC User Manual preview
TWLC
Brand: Cruisair Pages: 30
Midian Electronics TRC-2 Manual preview
TRC-2
Brand: Midian Electronics Pages: 22
ISC APECS Operational Instructions preview
APECS
Brand: ISC Pages: 20
Maintronic CBA UP Manual preview
CBA UP
Brand: Maintronic Pages: 53
SLV 470700 Operating Manual preview
470700
Brand: SLV Pages: 11
Bamo BAMOWIZ DOZ User Manual preview
BAMOWIZ DOZ
Brand: Bamo Pages: 10
Bettis GVO-C Series Operation And Maintenance Manual preview
GVO-C Series
Brand: Bettis Pages: 14
Hubbell Electric Fire Pump Controllers LXi-2400 Specifications preview
Electric Fire Pump Controllers LXi-2400
Brand: Hubbell Pages: 2
Bartels Mikrotechnik mpSmart-Dosing Instruction Manual preview
mpSmart-Dosing
Brand: Bartels Mikrotechnik Pages: 9
Solcon RVS-DXM Instruction Manual preview
RVS-DXM
Brand: Solcon Pages: 65
Watlow Anafaze PPC-2000 User Manual preview
Anafaze PPC-2000
Brand: Watlow Pages: 320
CS-Lab CSMIO/IP-A Tuning Manual preview
CSMIO/IP-A
Brand: CS-Lab Pages: 20
Kohler GM35950 Replacement preview
GM35950
Brand: Kohler Pages: 2
Akytec TRM210 User Manual preview
TRM210
Brand: Akytec Pages: 40

Brands by name

Popular brands

Load more brands