DMA Controller Module
MCF52235 ColdFire® Integrated Microcontroller Reference Manual, Rev. 6
Freescale Semiconductor
20-9
27–25
BWC
Bandwidth control. Indicates the number of bytes in a block transfer. When the byte count reaches a multiple of
the BWC value, the DMA releases the bus.
24–23
Reserved, should be cleared.
22
SINC
Source increment. Controls whether a source address increments after each successful transfer.
0 No change to SAR after a successful transfer.
1 The SAR increments by 1, 2, 4, or 16, as determined by the transfer size.
21–20
SSIZE
Source size. Determines the data size of the source bus cycle for the DMA control module.
00 Longword
01 Byte
10 Word
11 Line (16-byte burst)
19
DINC
Destination increment. Controls whether a destination address increments after each successful transfer.
0 No change to the DAR after a successful transfer.
1 The DAR increments by 1, 2, 4, or 16, depending upon the size of the transfer.
18–17
DSIZE
Destination size. Determines the data size of the destination bus cycle for the DMA controller.
00 Longword
01 Byte
10 Word
11 Line (16-byte burst)
16
START
Start transfer.
0 DMA inactive
1 The DMA begins the transfer in accordance to the values in the control registers. START is cleared
automatically after one system clock and is always read as logic 0.
Table 20-4. DCRn Field Descriptions (continued)
Field
Description
BWC
Number of kilobytes per block
000
DMA has priority and does not negate
its request until transfer completes.
001
16 Kbytes
010
32 Kbytes
011
64 Kbytes
100
128 Kbytes
101
256 Kbytes
110
512 Kbytes
111
1024 Kbytes
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:MCF52234CVM60,
MCF52235CVM60
