MCF52235 ColdFire® Integrated Microcontroller Reference Manual, Rev. 6
Freescale Semiconductor
31-1
Chapter 31
Debug Module
31.1
Introduction
This chapter describes the revision B+ enhanced hardware debug module.
31.1.1
Block Diagram
The debug module is shown in
.
Figure 31-1. Processor/Debug Module Interface
31.1.2
Overview
Debug support is divided into three areas:
•
Real-time trace support—The ability to determine the dynamic execution path through an
application is fundamental for debugging. The ColdFire solution implements an 8-bit parallel
output bus that reports processor execution status and data to an external emulator system. See
Section 31.4.4, “Real-Time Trace Support”
.
•
Background debug mode (BDM)—Provides low-level debugging in the ColdFire processor
complex. In BDM, the processor complex is halted and a variety of commands can be sent to the
processor to access memory, registers, and peripherals. The external emulator uses a three-pin,
serial, full-duplex channel. See
Section 31.4.1, “Background Debug Mode (BDM),”
and
Section 31.3, “Memory Map/Register Definition”.
•
Real-time debug support—BDM requires the processor to be halted, which many real-time
embedded applications cannot do. Debug interrupts let real-time systems execute a unique service
routine that can quickly save the contents of key registers and variables and return the system to
normal operation. External development systems can access saved data, because the hardware
supports concurrent operation of the processor and BDM-initiated commands. In addition, the
option allows interrupts to occur. See
Section 31.4.2, “Real-Time Debug Support”.
ColdFire CPU Core
Debug Module
High-speed
Communication Port
DSCLK, DSI, DSO
Control
BKPT
local bus
Trace Port
PST[3:0],
DDATA[3:0]
PSTCLK
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:MCF52234CVM60,
MCF52235CVM60
