ColdFire Core
MCF52235 ColdFire® Integrated Microcontroller Reference Manual, Rev. 6
3-20
Freescale Semiconductor
In the original M68000 ISA definition, lines A and F were effectively reserved for user-defined operations
(line A) and co-processor instructions (line F). Accordingly, there are two unique exception vectors
associated with illegal opwords in these two lines.
Any attempted execution of an illegal 16-bit opcode (except for line-A and line-F opcodes) generates an
illegal instruction exception (vector 4). Additionally, any attempted execution of any non-MAC line-A and
most line-F opcodes generate their unique exception types, vector numbers 10 and 11, respectively.
ColdFire cores do not provide illegal instruction detection on the extension words on any instruction,
including MOVEC.
3.3.4.4
Divide-By-Zero
Attempting to divide by zero causes an exception (vector 5, offset equal 0x014).
3.3.4.5
Privilege Violation
The attempted execution of a supervisor mode instruction while in user mode generates a privilege
violation exception. See
ColdFire Programmer’s Reference Manual
for a list of supervisor-mode
instructions.
There is one special case involving the HALT instruction. Normally, this opcode is a supervisor mode
instruction, but if the debug module's CSR[UHE] is set, then this instruction can be also be executed in
user mode for debugging purposes.
3.3.4.6
Trace Exception
To aid in program development, all ColdFire processors provide an instruction-by-instruction tracing
capability. While in trace mode, indicated by setting of the SR[T] bit, the completion of an instruction
execution (for all but the stop instruction) signals a trace exception. This functionality allows a debugger
to monitor program execution.
The stop instruction has the following effects:
1. The instruction before the stop executes and then generates a trace exception. In the exception stack
frame, the PC points to the stop opcode.
2. When the trace handler is exited, the stop instruction executes, loading the SR with the immediate
operand from the instruction.
0xA
EMAC, Move 3-bit Quick (MOV3Q)
0xB
Compare (CMP), Exclusive-OR (EOR)
0xC
Logical AND (AND), Multiply Word (MUL)
0xD
Add (ADD), Add Extended (ADDX)
0xE
Arithmetic and logical shifts (ASL, ASR, LSL, LSR)
0xF
Cache Push (CPUSHL), Write DDATA (WDDATA), Write Debug (WDEBUG)
Table 3-8. ColdFire Opword Line Definition (continued)
Opword[Line]
Instruction Class
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:MCF52234CVM60,
MCF52235CVM60
