Signal Descriptions
MCF52235 ColdFire® Integrated Microcontroller Reference Manual, Rev. 6
2-14
Freescale Semiconductor
2.16 EzPort Signal Descriptions
contains a list of EzPort external signals
Development Serial
Input
DSI
Development Serial Input. Internally synchronized input that provides
data input for the serial communication port to the debug module after
the DSCLK has been seen as high (logic 1).
I
Development Serial
Output
DSO
Development Serial Output. Provides serial output communication for
debug module responses. DSO is registered internally. The output is
delayed from the validation of DSCLK high.
O
Debug Data
DDATA[3:0]
Debug data. Displays captured processor data and breakpoint status.
The CLKOUT signal can be used by the development system to know
when to sample DDATA[3:0].
O
Processor Status Clock
PSTCLK
Processor Status Clock. Delayed version of the processor clock. Its
rising edge appears in the center of valid PST and DDATA output.
PSTCLK indicates when the development system should sample PST
and DDATA values.
If real-time trace is not used, setting CSR[PCD] keeps PSTCLK, and
PST and DDATA outputs from toggling without disabling triggers.
Non-quiescent operation can be reenabled by clearing CSR[PCD],
although the external development systems must resynchronize with
the PST and DDATA outputs.
PSTCLK starts clocking only when the first non-zero PST value (0xC,
0xD, or 0xF) occurs during system reset exception processing.
O
Processor Status
Outputs
PST[3:0]
Indicate core status. Debug mode timing is synchronous with the
processor clock; status is unrelated to the current bus transfer. The
CLKOUT signal can be used by the development system to know
when to sample PST[3:0].
O
All Processor Status
Outputs
ALLPST
Logical AND of PST[3.0]
O
Table 2-15. EzPort Signal Descriptions
Signal Name
Abbreviation
Function
I/O
EzPort Clock
EZPCK
Shift clock for EzPort transfers
I
EzPort Chip Select
EZPCS
Chip select for signaling the start and end of
serial transfers
I
EzPort Serial Data In
EZPD
EZPD is sampled on the rising edge of EZPCK
I
EzPort Serial Data Out
EZPQ
EZPQ transitions on the falling edge of EZPCK
O
Table 2-14. Debug Support Signals (continued)
Signal Name
Abbreviation
Function
I/O
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:MCF52234CVM60,
MCF52235CVM60
