Freescale Semiconductor MPC5553 Reference Manual Download

Page: 114 / 1208

MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5

Freescale Semiconductor

2-67

Figure 2-10. EMIOS[12:13] — DSPI B and DSPI D I/O Connections

Figure 2-11. EMIOS[14:15] — DSPI D I/O Connections

2.6

Revision History

Table 2-9.

Changes Added to MPC5553/5554RM for Rev. 4.0 Release

Description of Change

• Added the word ‘internal’ to the note in the Reset Output (RSTOUT) signal description to read ‘During an internal

power-on-reset (POR), RSTOUT is tri-stated.’

• Combined MPC5554 and MPC5553 detailed signal function descriptions using conditional text.
• Changed

Table 2-3

and

Table 2-4

to comply with the MPC556X model. Removed pin label column that now appears in

Table 2-1

and

Table 2-2

and added the muxed signal function names. Added footnotes to both tables.

•

Figure 2-1

Added the variable n to VDDE and VDDEH.

Section 2.3.14.12, “External I/O Supply Input VDDEn

” and

Section 2.3.14.13, “External I/O Supply Input VDDEHn

.”

• Added “+/-10%” to the description in

Section 2.3.14.14, “Fixed 3.3 V Internal Supply Input VDD33

• Incorporated more editing remarks: blank space before V symbol for volt; en dash instead of hyphen between a number

range.

• Added

Section 2.3.3.11, “External Bus Busy / GPIO - MPC5554 Only BB_GPIO[74]

.”

• EVTI Signal Description: Changed “EVTI is an input that is read on the negation of TRST to enable or disable the Nexus

debug port.” to “EVTI is an input that is read during a debug port reset to enable or disable the Nexus Auxiliary port (for
trace).”

CH13 IN
CH13 OUT

IN 14

IN 9

DSPI B

DSPI D

OUT 14

eMIOS

CH12 IN
CH12 OUT

EMIOS[13]_
DSPOUTD_

GPIO[192]

EMIOS[12]_
DSPOUTC_

GPIO[191]

IN 8

OUT 15

IN 15

CH15 IN
CH15 OUT

OUT 15

GPIO[204]_

EMIOS[15]

DSPI D

eMIOS

CH14 IN
CH14 OUT

OUT 14

GPIO[203]_

EMIOS[14]

EMIOS[14]_

IRQ[0]_

GPIO[193]

EMIOS[15]_

IRQ[1]_

GPIO[194]

Summary of Contents for MPC5553

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MPC5553

Reviews:

Related manuals for MPC5553

Brands by name

Popular brands

Freescale Semiconductor MPC5553, Reference Manual

Search results

Summary of Contents for MPC5553

Reviews:

Related manuals for MPC5553

Brands by name

Popular brands